Qiaojiang Exhibition · est. 2012 Own 2,500 m² workshop in Dongyang, Zhejiang
1-hour on-site response during shows +86 182 6690 6685

What an exhibition stand costs in China

Turnkey rates for overseas exhibitors, published in US dollars. Design, drawings, venue approval, build and dismantling are all in the number.

Swipe the table sideways to see all columns.

Turnkey exhibition stand rates in China, 2026, in US dollars
SystemTurnkey rate36 m²Lead timeIncludes
Truss + printed wrap
Truss frame, full-wrap printed graphic
US$110–150 per m² US$4,000–5,400 3–5 days Design, truss, printed panels, install, dismantle
Aluminium system
Aluminium profile with panels or graphics
US$170–230 per m² US$6,100–8,300 5–7 days Design, aluminium frame, facing, standard lighting, install
Timber / custom build
Timber carcass, spray finish or vinyl wrap
US$250–330 per m² US$9,000–11,900 7–12 days Design, timber work, painting, shaping, standard lighting, install

Rates valid to 31 December 2026, quoted and invoiced in US dollars. Minimum project value US$2,000 for stands below 18 m², because design, drawings, venue submission and crew mobilisation cost the same whether the stand is 9 m² or 17 m². Rates exclude venue electricity, the special-construction management fee and the refundable deposit.

Why this is not the lowest number you will be quoted

You will find quotes for China at a third of these rates. They are usually structure only: no design, no construction drawings, no venue submission, no fire certificates, no English-speaking project manager, and a crew hired at the gate on the morning of the build. That is a legitimate product — for a company that already has a Chinese office to supervise it.

We sell the other product. One contract covers the whole sequence, the client never has to visit China before the show, and the person answering your email is the person standing in the hall at 7 a.m. when the fascia does not fit.

Already have a Chinese office handling drawings, submission and site supervision? Say so when you enquire — we quote that narrower scope separately and in CNY, and it is a different number.

How that compares internationally

Both ranges below are 2026 market guides published by stand builders in each market, not our estimates.

MarketTypical 2026 rate
Europe — custom design and build€400–1,000/m² (US$430–1,080)
Europe — double-deck or flagship€900–1,500/m² (US$970–1,620)
China — turnkey for overseas exhibitorsUS$150–450/m²
Qiaojiang — turnkeyUS$110–330/m²

China is roughly a third of the European cost for the same drawing, because labour, materials and workshop space are local and nothing is imported. What you are not buying in China is a contractor who speaks your language — which is the part we add.

What the venue bills you separately

Three charges come from the exhibition centre, not from us. They appear on the venue's invoice, usually after the show, and they surprise first-time exhibitors more than anything else. No two venues price them the same — we will not print a single number and have you budget against the wrong hall.

  • Electricity — metered or pre-estimated per connection. The rate is set by the venue and the figure also depends on the load you order: a stand with a screen wall costs more than one with lighting only
  • Special-construction management fee — charged per m² per show, at each venue's own rate. It is the fee for building a custom stand instead of taking a shell scheme
  • Refundable deposit — scaled to stand size and set by the venue. Returned after dismantling if the site is left clean

All three are passed through at cost, with the venue's own schedule attached to your quotation, so you see exactly what the hall charges and what we charge. If you tell us the show and the booth number before you commit, we will pull that venue's current rates and put them in the budget.

Why the cheapest quote is usually the most expensive

A 36 m² stand quoted at US$1,200 will almost always be truss with printed panels, installed by day labour, with no drawings submitted and no fire certificates. What follows is predictable: the drawings are rejected, the build runs into the night, the venue charges overtime, and the fascia has a visible seam where two panels meet.

We would rather quote US$9,000 with the paperwork done and the crew on our payroll. If your budget genuinely is at the lower end, say so — we will tell you what can be cut without breaking the stand.

How area is measured

By the booth's floor area as allocated by the organiser, including the fascia footprint. A 3×3 m shell scheme is 9 m²; a 6×6 m island booth is 36 m². Height, double-deck structures, mezzanines and suspended elements are priced separately from drawings.

Payment

Terms

Payment

Deposit on order, balance after on-site acceptance. Quoted and invoiced in US dollars; bank charges shown separately. Chinese entities can be invoiced in CNY.

Invoice

China's electronic VAT invoice for construction services, plus a commercial invoice in English for your accounts department.

Cancellation

Before workshop fabrication: design work is charged, materials are not. After fabrication starts, materials already cut are chargeable.

Send us your booth number. Get a 3D concept and an itemised quote.

Tell us the show, the booth number and the floor area. Within 3 working days you get a floor plan, 3D renders and a line-by-line quotation. If the concept misses, you owe us nothing for the design.